Bakersfield will thrive again! Moderated business marketplace list > Bakersfield
> Manufacturing
> 8 channel data acquisition system rs-485 out adam-4017
8 channel data acquisition system rs-485 out adam-4017
Complete 8 Channel Data Acquisition System RS-485 Output ADAM-4017
It consists of a ADAM-4017 8 channel DAQ module, FW Bell PC-200 current sensor, doubly fused 100-240 VAC input power supply, and assorted terminal blocks and connectors in a RF shielded metal box.
I found this with a Google search for ADAM-4017: A Windows PC is generally required to configure the modules initially, using the software supplied with the module. Adam modules can be controlled using simple ASCII commands over the serial link. An ADAM-4520 RS-232 to RS-422/485 converter may be needed, unless your PC has an RS-422/485 port. Once this initial configuration has been done, the module stores the configuration in its internal non-volatile memory. You can then connect any serial device to it and use the simple ASCII commands to read data.
Click HERE to see the data sheet for the ADAM-4017.
Click HERE to see the data sheet for the FW Bell PC-200 current sensor.
And HERE to see the data sheet for the Astrodyne power supply