Bakersfield will thrive again! Moderated business marketplace list > Bakersfield
> Exports
> (8) brass ball electrodes, brass rods, insulators tesla
(8) brass ball electrodes, brass rods, insulators tesla
(6) Porcelain Insulators with a nice "Tesla Look" and a 1/4 inch hole going all the way thru.
(4) feet of insulated copper strap, about 1/4 of an inch wide and 1/16 of an inch thick. Great for a Terry filter ground, high voltage/current hook up or a mini coil primary etc ( the picture shows a small piece with the insulation removed). The insulation is very tough and high voltage and chemical resistant.
(1) foot of 1 1/2 inch wide, 7 mil copper ribbon (see close up for thickness)
(3) Glastic fiberglass standoffs that are drilled and tapped 1/4-20 to match the threaded rods
(2) approx 1 foot solid brass rod, threaded 1/4-20 . Easy to cut to any length you need.
(4) 3/4 inch solid brass balls that were turned on a lathe and drilled and tapped with a 1/4-20 blind hole.
(4) 5/8 inch solid brass balls that were turned on a lathe and drilled and tapped with a 1/4-20 blind hole.
(6) soild brass nuts tapped 1/4-20
(6) solid brass washers 1/4 inch
(2) approx 9 inch soild brass rods. These can be easily cut and used in the brass holders as electrodes or threaded to 1/4-20 with a standard die.
(2) solid copper holders for 1/4 inch rod
