Bakersfield will thrive again! Moderated business marketplace list > East Bakersfield
> Exports
> 3 amp constant current rectifier
3 amp constant current rectifier
3 Amp Constant Current Rectifier
Constant current/voltage power control
This new system has the latest technology for small plating and anodizing operations. The constant current control is particularly useful for anodizing using the Caswell LCD Anodizing system.
Several of our plating systems use small amounts of current, and if plating parts with only a few square inches, this can sometimes be a real problem to obtain accurate current outputs from larger machines.
The system will operate comfortably at 1/10 of an amp.
For constant amperage control:
1. Adjust the voltage knob to the maximum clockwise position
3. Adjust the amps knob to the desired output voltage
4. Connect the plating tank to the unit
1. Adjust the amperage knob to the maximum clockwise position.
2. Adjust the voltage knob to the minimum anti-clockwise position.
4. Connect the plating tank to the unit
5. Adjust the voltage knob to the desired amperage requirement
For restricted current protection:
2. Adjust amperage knob to the maximum anti-clockwise position.
3. Adjust voltage knob to the desired voltage position.
4. Connect to the plating tank
5. Adjust the amperage knob clockwise to set the output current at the desired level for restricted current protection.
In the event of a short circuit, at the output, the current will limit at the value set by the current controls, however the unit should be turned off and the short circuit removed before continuing use.
* Input voltage: 110 ac 50/60Hz
* Line Regulation: CV < 0.01% +1mV
* Load Regulation: CV< 0.01%+3mV(<3A)
* Ripple & Noise: CV<0.5mVr.m.s (1<3a)
* Protection: constant current and short circuit protection
* Voltage Indication Accuracy: 1%+2 digits
* Current Indication Accuracy: 2%+ 2 digits
